Honing Machine Mi-550

  • Hone diameter capacity                               (mm)                 68 to 140
  • Hone length capacity (power stroke)        (mm)                      305
  • Honing speed (general)                                Rpm                   80 & 160
  • Honing speed (with inverter) step less     Rpm                    0 to 160
  • Max. Cylinder block length                          mm                       1000
  • Electric motor (3 phase)                                Hp                            2
  • Stroking speed                                                Spm                        0-60
  • Air requirement at 100 psi                            Cfm                           4
  • FLOOR Space lxbxh                                        mm            1651 * 1626 * 1600
  • Shipping weight                                                Lbs                        1240
  • Bearing plate swivel angle                           Degree              ± 45° to 90°

 

  • Master-pneumatic cylinder honing machine and vertical honing machine MI-550 is a quality product from the 1992  and  1999  NSIC  techmart  award  winner  team  of  qualified  and  highly  experienced  engineers  and  skilled work  force.  The  cabinet  of  the  machine  is  constructed  out  of  10  S  W  gauge  sheet.  Material  duly  painted  to make it quite sturdy and durable. MI-550 master pneumatic cylinder honing machine gives a close dimensional accuracy  and  a  perfect  cross  hatch  pattern  in  the  bores  of  engine  cylinder  body  and  sleeve.  In  this  model conventional  vitrified  or  abrasives  are  easily  interchangeable  linear  movement  from  end  to  end  is  on  linear bearings.  Stroke  speeds  are  variable  and  controllable.  It  is  very  easy  to  dial at any  desired  RPM  and  rate  at any time while honing cradle of this machine can be indexed for precise alignment of inline and 60º or 90º V’S.  FEATURES 1. The Hone Block is mounted on a sliding device to facilitate quick bore centering in a few seconds.  2. All the operations of the machines have been designed to be controlled in an easy way.  3. In case of taper in the bore at the upper & lower portion, the hone can be set at the particular level (inching) 4. The Machine is DUCO painted to give it an excellent look.  5. This Machine is Completely noiseless in comparison with the Hydraulic one.  6. The machine is box – type which avoids the wastage of cooling liquid.  7. Due to its free flowing Honing Head, it can be adjusted left-right / up-down in the cylinder, bore within seconds.

Product Description

  • Hone diameter capacity                               (mm)                 68 to 140
  • Hone length capacity (power stroke)        (mm)                      305
  • Honing speed (general)                                Rpm                   80 & 160
  • Honing speed (with inverter) step less     Rpm                    0 to 160
  • Max. Cylinder block length                          mm                       1000
  • Electric motor (3 phase)                                Hp                            2
  • Stroking speed                                                Spm                        0-60
  • Air requirement at 100 psi                            Cfm                           4
  • FLOOR Space lxbxh                                        mm            1651 * 1626 * 1600
  • Shipping weight                                                Lbs                        1240
  • Bearing plate swivel angle                           Degree              ± 45° to 90°
  • Master-pneumatic cylinder honing machine and vertical honing machine MI-550 is a quality product from the 1992  and  1999  NSIC  techmart  award  winner  team  of  qualified  and  highly  experienced  engineers  and  skilled work  force.  The  cabinet  of  the  machine  is  constructed  out  of  10  S  W  gauge  sheet.  Material  duly  painted  to make it quite sturdy and durable. MI-550 master pneumatic cylinder honing machine gives a close dimensional accuracy  and  a  perfect  cross  hatch  pattern  in  the  bores  of  engine  cylinder  body  and  sleeve.  In  this  model conventional  vitrified  or  abrasives  are  easily  interchangeable  linear  movement  from  end  to  end  is  on  linear bearings.  Stroke  speeds  are  variable  and  controllable.  It  is  very  easy  to  dial at any  desired  RPM  and  rate  at any time while honing cradle of this machine can be indexed for precise alignment of inline and 60º or 90º V’S.  FEATURES 1. The Hone Block is mounted on a sliding device to facilitate quick bore centering in a few seconds.  2. All the operations of the machines have been designed to be controlled in an easy way.  3. In case of taper in the bore at the upper & lower portion, the hone can be set at the particular level (inching) 4. The Machine is DUCO painted to give it an excellent look.  5. This Machine is Completely noiseless in comparison with the Hydraulic one.  6. The machine is box – type which avoids the wastage of cooling liquid.  7. Due to its free flowing Honing Head, it can be adjusted left-right / up-down in the cylinder, bore within seconds.